Polaris RZR Pro XP/Turbo R/Pro S Post-Airbox to Turbo High Flow Intake w/ Catch Can - Aftermarket Assassins

Fits 2020-Up Pro XP/Turbo R/Pro S 2 & 4 Seat Models

• Intake tube with integrated catch can is a must have for any Pro XP/Turbo R/Pro S, but especially needed when running our Level 4 or higher tunes. When boost levels come up, so does crank case pressure. When this happens you push more oil/water vapor/fuel out of the crank case breather. These items then go through your intact tract and cause issues, especially with the MAP sensors.
• Integrated catch can uses the intake vacuum to drop crank case pressure. Using a 1.5" port (1/2" larger than factory) we draw more negative pressure to help sustain horsepower under higher boost pressure.
• Catch can easily drains with the valve. We recommend draining after every ride if possible.
• High flow intake tube replaces the factory cheesy tube to create less resistance and better airflow.
• More air volume on tap at the turbocharger for quicker spool.
• Aluminum tubes dissipate heat MUCH better than silicone tubes.
• Aluminum tubes are stronger and flow better than silicone tubes when doing back to back tests.
• Aluminum tubes will not collapse! Silicone intake tubes even when 4 or 5 ply can still collapse with higher boost.
• 1/8" barb installed on the intake tube for your factory boost controller bleed hose. This fixes the issue with the bleed hose becoming clogged with dirt/mud/sand and not working properly.
• Better seal than the factory tube with nice silicone couplers.
• High quality TIG welded aluminum tube with bead rolled edges.
• Made at the AA facility in the USA.
• See instructions HERE.
• Part number: 112-1025.