Polaris RZR 35pc Tool Kit - PRP

RZR Tool Kit provides everything you need to fix your RZR out on the trail. This 34 piece kit includes a selection of high-quality ratchets, sockets, wrenches, extension bars, pliers, and a ball peen hammer (for when things get really fun). Weve hand picked the tools that are needed most when working on a Polaris RZR So you have only the essentials that you really need. Below we have listed all the tools included, along with a handy guide to the most common uses for each tool. Each tool also includes a Limited Lifetime Warranty.

This kit also includes a 1/4" clutch bolt for Turbo, Turbo S, RS1, and PRO XPs. Rather than using the L shaped clutch wrench thats included in the stock tool kit (where you have to spin it by hand a thousand times), you can simply insert this bolt, and use a ratchet (or impact) to tighten it down in seconds. The bolt holds the secondary clutch open, so you can quickly and easily change the belt.

KIT INCLUDES

• 1- Flat Head screwdriver Hose clamps
• 1- Groove joint pliers
• 1- Big head cutting pliers
• 1- Needle nose pliers-For when you drop things down where its hard to reach
• 1- Crescent wrench-Used on almost everything
• 1- Ball peen hammer-If something doesnt fit"¦make it fit
• 1- 1/4" ratchet
• 1- 3/8" ratchet
• 1-1/4" extension bar
• 1-3/8" extension bar
• 1-1/4" flex extension bar
• 1-T25 x 1/4"-Door-skins, buss bar, CV boot guard, ECU
• 1-T27 x 1/4"-Overflow bottle, EPS cover, seat adjuster
• 1-T40 x 1/4"-Bodywork, hood
• 1-3/8" to 1/2" adapter
• 1-8mm Allen Head Socket x 3/8"-Diff drain & fill, Trans drain & fill
• 1-8mm Socket x 1/4"-CVT Cover, side case
• 1-10mm Socket x 3/8"-Skid plate, ground wire, starter solenoid, shift sensor, ex heat shield, rad mount, buss bar
• 1-11mm Socket x 3/8"-PRP Belt Changing Tool & Bolt, various aftermarket products
• 1-13mm Socket x 3/8"-Frame support, sway bar mount, front facia, brake line, steering shaft, battery cable, ext water pump, pedal assembly, rock guard
• 1-15mm Socket x 3/8"-Ball joint pinch bolts, steering shaft, EPS, cage, harness bar, rear caliper brakes, rear hub, swaybar, remove secondary clutch
• 1-16mm Socket x 3/8"-Diff mount, Front caliper bracket, seat belts
• 1-17mm Socket x 3/8"-Steering shaft, turbo oil line
• 1-18mm Socket x 3/8"-Shocks, A-arms, trailing arm, frame support, radius rods, tie rod, diff
• 1-19mm Socket x 3/8"-Turbo oil line, lug nuts, seat belts
• 1-21mm Socket x 3/8"-Primary clutch bolt
• 1-27mm Socket x 1/2"-Axle nut
• 1-8mm Combo Wrench-CVT Cover, side case
• 1-10mm Combo Wrench-Skid plate, ground wire, starter solenoid, shift sensor, ex heat shield, rad mount, buss bar
• 1-13mm Combo Wrench-Frame support, sway-bar mount, front fascia, brake line, steering shaft, battery cable, ext water pump, pedal assembly, rock guard
• 1-15mm Combo Wrench-Ball joint pinch bolts, steering shaft, EPS, cage, harness bar, rear caliper brakes, rear hub, sway-bar
• 1-17mm Combo Wrench-Steering shaft, turbo oil line
• 1-18mm Combo Wrench-Shocks, A-arms, trailing arm, frame support, radius rods, tie rod, diff
• 1-Belt Changing Bolt-(RZR Turbo, Turbo S, RS1, PRO XP) Insert the bolt into the secondary clutch, and tighten it down with a ratchet (or impact gun). The bolt holds the clutch open and allows you to change a belt in seconds.