Polaris Ranger XD 1500 Sequential LED Rocker Turn Signal Switch Kit - WD Electronics

Includes:

• LED Sequential Strips with white Switchbacks. (underneath headlight).
• These are daytime running lights when the turn signal is not activated and then they switch to amber once the turn signal is activated. See our FAQ page for install related questions.
• 100 % Plug-and-play Turn Signal Kit
• With all required connections for your machine to integrate into your rear tail lights
• Turn Signal Switch that mounts on your steering column (This does require minor cutting into the plastic shroud around the steering column.)
• Wiring harness to mount stand-alone blue LEDs on the dash (The Blue LEDs require drilling)
• Horn Kit (rocker switch for Dash)
• Aluminum LED License Plate (fits 4x7in plate)
• Instructions

Note:

• In 3-set models ONLY - There are 2 lower open switch blanks that you may want to use for the horn (PHH-6) and/or hazard (PTSK-8010).
• If your accessory panel only has one open switch blank (as shown in the picture below) the horn harness included in your kit will mount there. If you do not have any available switch blanks we have extended options for you to mount the horn (PTSK-8024) and hazard (PTSK-8023) in the roof panel.
• Not compatible with Non-Northstar Models.