Can-Am Commander Apex Lights (Red) - Ravek

Introducing the first-ever 100% Plug & Play UTV running and brake light.

With an Unlimited Lifetime Warranty and custom vehicle-specific wiring for more than 35 different UTV models, Apex Lights have raised the standard for UTV accent lighting.

Heres an overview of what you get with the Red Apex Lights:

• Two Apex Lights. IP67-Rated, 100% waterproof and dustproof
• Custom Plug & Play wire harnesses for the Can-Am Commander
• Multi-Mount Hardware: mount Apex Lights to any flat body panel, roll cage, roof, or bumper

KEY SPECS

• 5x Brighter than Can-Am OEM rear running and brake lights
• 54 LEDs in each light, with perfectly diffused light output (no LED diode "œhot spots")
• Heavy-duty, impact-ready and scratch-resistant polycarbonate lenses
• Aluminum heat-sink frame
• Extreme lighting efficiency: 2 Amps per pair of Apex Lights

PULSING BRAKE LIGHTS

When you brake, the Red Can-Am Commander Apex Lights pulse rapidly. After a split second of pulsing, the brake lights then hold a standard brake light output that is 300% brighter than OEM brake lights. This pulsing effect increases visibility to trailing drivers and makes it clear youre slowing down.

WATERPROOF & DUSTPROOF. EFFECTIVELY INDESTRUCTIBLE

The Can-Am Commander Apex Lights are IP67-rated, 100% waterproof and dustproof lights. Each light has a smoked polycarbonate lens built to withstand 2,600 pounds of pressure per square inch.

PERFECTLY DIFFUSED LIGHT OUTPUT

The Can-Am Commander Apex Lights are engineered to display perfect LED diffusion. That means Apex Lights throw off a perfectly consistent, clean beam of light with no LED diode "œhot spots".

LIGHTING CUSTOMIZATION & MOUNTING OPTIONS

Apex Lights unlock a new level of UTV customization and safety. RAVEKs Multi-Mount hardware (included in every kit) allows you to mount Apex Lights effectively anywhere on your UTV, including:

• Exterior Body Panels (rear and/or side panels)
• Roll Cage
• Roof
• Bumpers

Each Apex Lights kit includes two custom RAVEK roll-bar mount adapters and two heavy-duty waterproof straps, so you can choose between either a flat surface or roll-bar mounted installation on any 1.25" - 2.5" roll bar or bumper.

Each kit also comes with hardware so you can choose between a no-drill or drill-mounted installation.

ADD LIGHTING HIGHER UP ON YOUR UTV

The original concept behind the Apex Lights was to create running, brake, and turn lighting that we could mount high up on our UTVs. We mount a few pairs of Apex lights high up on each of our machines - they dramatically increase visibility and make our machines easy to pick out of a group.

EXTREME LIGHTING EFFECIENCY

With only 2 Amps of draw per pair of Apex Lights, you can mount as many Apex Lights as you want to give your SxS a truly custom look.

If you have an aftermarket UTV Turn Signal Kit installed, you can sync up to 3 pairs of Apex Lights to your turn signal kit controller box.

Overview:

• Mount Anywhere: Roof, Panel, Bumper Cage
• Flashes when braking for greater visibility
• IP67 Waterproof & Impact-Ready
• Truly Plug & Play DIY Installation
• Unlimited Lifetime Warranty

Features:

• 500% Brighter Than OEM Taillights: Be prepared and visible in dusty or low-visibility conditions. The Apex Light runs 5x brighter than Commander stock taillights. When you brake, they pulse four times before delivering 300% brighter light than OEM brake lights through their ultra-durable, 8" rigid lenses.
• Customized To You With Next-Generation Diffused LEDs: Mount to ANY flat surface or 1.25"-2.5" roll bar, including bumpers. Fully Plug & Play installation for the Commander in under 30 minutes with no drilling required. Add up to three sets - six lights total - on your roof, roll bar, rear bumper, or wherever else you can imagine. Custom diffusion reflector delivers an even, futuristic look.
• Rugged, Nearly Indestructible Formed Lights: IP67-rated with heavy-duty polycarbonate lenses, aluminum heat-sink frames, and premium waterproof wiring make these lights ready for anything. Weve rolled our UTVs and knocked them into trees at speed without leaving even a scratch on the Apex lights. But try to avoid rolling please.

Technical Specifications:

• Waterproof Rating: IP67
• Amperage: 0.25A - 1.1A
• Watts: 10.5 - 15.4
• Temperature Rating: -40° F - 140° F
• Weight (oz.): 4.2
• Size: 7 7/8" L x 7/8" W

Raw Lumens

• White: 1,512
• Amber: 1,080
• Red: 378

Installation Options

• Plug & Play Harness
• Roll Bar Mount
• Adhesive Mount
• Drill or No-Drill

Installation:

• Est. Install Time: 20-40 minutes