Kfi Ranger/gravely M-mt Kit-yellow - UTV-1080

This kit will allow you to mount your winch on the front or the rear of your Polaris Ranger or Gravely using the stock rear 2" receiver and the supplied front 2" receiver. Kit includes the following:(1) Front upper 2" receiver that mounts in the location shown in the picture (#101080)(1) 2" Receiver Winch Mount (#100620)(1) 20" Quick Connect that gets wired to your winch leads (#QC-20)(1) 48" Quick Connect that goes from your winch contactor to the front of your Ranger (#QC-48)(1) 120" Quick Connect that goes from your winch contactor to the rear of your Ranger (#QC-120)(1) Standard 5/8" Hitch Pin (#ATV-20PIN)Specifications:100% MADE IN USAConstructed of 3/16" steelUnlike all other competitors, our products are metal bead blasted before they are powder coated for the best possible finish prep.Powder-coated black for supreme durabilityComplete installation instructions includedAll mounting hardware includedSatisfaction guaranteedRoller fairlead and winch not includedNote: This mount requires a roller fairlead bracket that comes with most of the winches out there. If your winch kit did not come with a fairlead bracket you will need the following:For most winches with a 4-Hole 3.00" x 4.875" (STANDARD) KFI #100495For most winches with a 4-Hole 3.00" x 6.600" (WIDE) KFI #100695For WARN VRX or AXON winches with a 3.00" x 4.875" (STANDARD) KFI #101715 COMPATIBLE WINCHES:KFI: ST17 / S2000 / A2000 / A2500-R2 / A3000 / U45-R2 / U45w-R2 / SE25 / SE35 / SE45-R2 / SE45w-R2KFI: AM-25 / AM-35 / AS-25 / AS-35KFI: AS-50x / AS-50wxWARN: A2000 / A2500 / U2500 / 1.5ci / 2.5ci / 2.5ce / 3.0ci / 3.0ceWARN: VRX 25 / VRX 25-S / VRX 35 / VRX 35-S / VRX 45 / VRX 45-SWARN: AXON 35 / AXON 35-S / AXON 45RCWARN: AXON 45 / AXON 45-S / AXON 55 / AXON 55-SWARN: RT15 / RT25 / RT30 / XT15 / XT25 / XT30WARN: Vantage 2000-3000lbs / ProVantage 2500-3500lbsWARN: RT40 / XT40WARN: Vantage 4000lbs / ProVantage 4500lbsRAMSEY: ATV2500 / ATV3000SUPERWINCH: Terra25 / Terra35 / Terra 45 / A3500 / LT2000 / LT2500 / LT3000 / LT4000ATVMILE MARKER: PE2.5 / PE3.5 / VMX2.5 / PE2000 / PE3000 / PE2500 / PE3500MASTER LOCK: 1500lbs #2955ATRequires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF.CYCLE COUNTRY: Work Power 1500 and 2500 / PowerMax 2500 and 3500BADLAND: Apex 5500 WideBADLAND: 2-Hole WinchesBADLAND: Standard WinchesBADLAND: WIDE WinchesCHAMPION: 2-Hole WinchesCHAMPION: Standard WinchesCHAMPION: WIDE WinchesCHAMPION: 14001 and 14061SMITTYBILT: XRC 2.0Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF.Listed models come with incorrect ATV roller fairleads.SMITTYBILT: XRC 3.0 / XRC 4.0XGEAR: X3000 / X40004-Hole Standard (3.00" x 4.875" bolt pattern)KEEPER CORP. TRAKKER: KT2500 / KT3000 / KT2500C / KT3000C / KT4000 / KT4000CVENOM: 2000 / 2500 / 3000 / 3500 / 4000 / 4500 / 5000 (Hardcore Series)All with 3.00" x 4.875" bolt pattern mount-up.All with 3.00" x 6.600" bolt pattern mount-up.TRAVELLER: 1078311TRAVELLER: 1078088 / 1078302Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RFPossibly many others with the below standard mounting patterns, call to confirm.4-Hole (3.00" x 4.875" bolt pattern with rollers that are 4.875" bolt pattern)4-Hole WIDE (3.00" x 6.60" bolt pattern with rollers that are 6.600" or 6.000" bolt pattern)2-Hole (3.10" with rollers that are 4.875" bolt pattern)