J & M - 400W 2-Channel Bluetooth Amp Kit - Harley Davidson - ROKKER XXR 400W Bluetooth Controlled Amplifier Kit - JAMP-400RK14BLU
J & M
$1,075.20
$1,199.95
(You save
$124.75
)
(No reviews yet)
Write a Review
J & M
J & M - 400W 2-Channel Bluetooth Amp Kit - Harley Davidson - ROKKER XXR 400W Bluetooth Controlled Amplifier Kit - JAMP-400RK14BLU
400W 2-Channel Bluetooth Amp Kit - Harley Davidson
ROKKER XXR 400W Bluetooth Controlled Amplifier Kit
Simply link your SmartPhone to the weatherproof handlebar controller via Bluetooth and control all volume and track up/down music functions direct from the handlebar buttons.
This is a full range class D audio amplifier and is spec'd at 200watts RMS per channel X2 channels, (400w total) driven continuous into a 2-ohm load @ 14.4vdc.
Amplifier mounts to the custom made stainless steel bracket system inside the left saddlebag.
BlueTooth control mounts to the black-powder coated SS handlebar bracket.
Custom made heavy-duty plug-n-play wiring harnesses are all built at the J&M factory in Tucson for this specific application, to allow connection to either 2 or 4 total speakers on the RoadKing.
Wiring harness system includes waterproof plugs/pins at each location including the left side saddlebag panel connector (like CVO) & Bluetooth control head connections.
Top quality heavy gauge power/ground wires are used for the fused battery connection, along with all necessary mounting hardware & complete installation/operation instructions.
Amplifier measures 7-1/4 X 4-3/4 X 1-3/4
ROKKER XXR 400W Bluetooth Controlled Amplifier Kit
Simply link your SmartPhone to the weatherproof handlebar controller via Bluetooth and control all volume and track up/down music functions direct from the handlebar buttons.
This is a full range class D audio amplifier and is spec'd at 200watts RMS per channel X2 channels, (400w total) driven continuous into a 2-ohm load @ 14.4vdc.
Amplifier mounts to the custom made stainless steel bracket system inside the left saddlebag.
BlueTooth control mounts to the black-powder coated SS handlebar bracket.
Custom made heavy-duty plug-n-play wiring harnesses are all built at the J&M factory in Tucson for this specific application, to allow connection to either 2 or 4 total speakers on the RoadKing.
Wiring harness system includes waterproof plugs/pins at each location including the left side saddlebag panel connector (like CVO) & Bluetooth control head connections.
Top quality heavy gauge power/ground wires are used for the fused battery connection, along with all necessary mounting hardware & complete installation/operation instructions.
Amplifier measures 7-1/4 X 4-3/4 X 1-3/4